Posted 4/11/2026 21:07 (#11614952 - in reply to #11611754) Subject: RE: NH3 with Raven iso VT
Just north of I-90 in SW MN
On our system the nitrogen is measured as pounds of N per acre. Find your flowmeter and it should have a tag with a cal number. There should be a page for your meter cal, toolbar width and valve cal. Put that number from the meter in and do a test.
Using a JD gen4 with Raven ISO. Have used same setup on CaseIH Pro700 with no problems.
NH3 with Raven iso VT
