|
| As far as flow test goes, the flow test require inputting a speed and I have done that. However, once the system is shut down that is cleared. This is an ongoing issue.
Manual or Auto? I don't know how to go to "manual" on the GS2. I have needed Manual before and couldn't find it. This is a liquid fertilizer applicator. I spray with a Viper Pro. Raven makes it easy!! I will say that it seems to seek the "Target Rate" and hold on to it, BUT in a very small window, if that makes sense. It will stay on 35.0 until speed changes or one section is shut off, etc. I would expect it to have at least a 20 psi range or more. It has in the past. | |
|
JD rate controller need help
