|
SESD | Did you get a 4002506-12 display cable (it has CAN B cabling, CAN A won't work)? If so you could probably re-pin that 4004301 cables connectors to work. Basically it all needs to get tee'd together green wires to green wires, yellow to yellow, red to red and black to black. The 6 pin connector on the 4004301 might connect to the UC7 then one of the 4 pin connectors could connect to a matching one on the 4002506 cable. There is usually a terminator or two needed with ISO systems though. They were included in that 4200175 kit you mentioned in your other post. | |
|
Norac Can to Ag leader ISOBUS can b
