|
SC WI | This one.
Checking the harness and verification of two terminators on the CAN is important also. The implement should have one. When the implement is disconnected the IBBC terminator takes its place. The other one is on the tractor or the seperate add on harness to the hitch.
I have seen aftermarket screens T into the tractor with their own terminator on the harness so there are 3 terminators online and it causes communication problems.
The same communication problems can happen when one of the two terminators fail intermittently.
Edited by farmer_white 4/9/2026 13:10
 (Screenshot_20260409_125756_Samsung Internet (full).jpg)
Attachments
----------------
 Screenshot_20260409_125756_Samsung Internet (full).jpg (121KB - 1 downloads)
| |
|
ISOBUS disconnection Trimble GFX 750
