|
| Having trouble with the rate 2. Normally apply half rate pre nh3 up front then sidedress 28%. Doing some custom at 190 N. Using rate 2 it was applying much less.. by my figures rate 2 is applying lbs of product and not lbs of N with nh3. I cannot find a setting to change the rate from lbs of product to lbs of N.
Rate 1 for us is always dead on at 110 but finding that rate 2 when applying a 190 is under applying. Using a 2630 display with Raven iso controller | |
|
NH3 with Raven iso VT
