|
NW Iowa | Most all that stuff is gobbled up. You can make them work, by fitting them together.
Yes i know the pipes are bigger, but you can make them work.
I've owned all of them
I know a guy that has everything you need, but he is in Canada.
Edit- The 1150 cab in that photo had a dealer installed M&W kit when it was new.
I have had and worked on tons of these.
The late 1130 will have the same dimpling as the 1150
YES a 1130 rear assemble and all the decking will go right on a 1150!!!
The gearing will be a little faster i believe, because of the higher rpm of the V8. But you can split them right at the engine
and roll them together.
The 1100 will not work because of smaller fuel tanks and decking.
Edited by Massey1155 4/7/2026 18:56
 (029 (full).JPG)
 (001 (16) (full).JPG)
 (KIMG2263 (full).JPG)
 (007 (4) (full).JPG)
 (IMG_20260407_184629 (full).jpg)
 (IMG_20260407_184635 (full).jpg)
Attachments
----------------
 029 (full).JPG (129KB - 7 downloads)
001 (16) (full).JPG (115KB - 6 downloads)
KIMG2263 (full).JPG (122KB - 5 downloads)
007 (4) (full).JPG (133KB - 4 downloads)
IMG_20260407_184629 (full).jpg (161KB - 2 downloads)
IMG_20260407_184635 (full).jpg (225KB - 1 downloads)
| |
|
Massey 1150 tractor parts
