|
New Zealand | gps configured: autonomous means it is set up to be uncorrected.
From the start page, push the spanner icon, then highlight the satellite and push setup. from there you can change from autonomous to sbas (for WAAS) or to RTK.
For waas you might have to change which satellite it is trying to get the corrections from.
To receive RTK you will need either a Trimble sold RV55 modem, or an external modem that can transmit corrections via serial, which will connect to port D on the back. Digifarm sells a solution for that.
you can also use the internal trimble radios, but it is probably easier and cheaper to go the route of external modems and serial connection.
| |
|
How do I get rtk signal fm1000
