|
NW KS | I don't have that model but it should be ok. The measuring is done with an oval gear flow meter. I built basically my own version of that metering setup with a cheap oval gear meter and get decent results. The meter I use has some variance between chemicals but is better than any other mechanical meter I have used. A higher dollar oval gear flow meter might have better tolerances too, I haven't tested that. There are several different companies that use an oval gear meter in their chemical measuring products. I definitely recommend something that uses the transfer pump rather than a tote mounted chemical pump. It's hard to keep the tote pumps working since they are in direct contact with chemical. | |
|
STS chemical metering system
