|
| I just finally figured out why the left side blinker was not working on my 8560. On the circuit board under the steering wheel, there are 2 relays that control the blinkers, one relay for the right side one for the left. I had power at the relays but wasn't getting the signal to trigger the relay. The board sits at an angle and dust collects on the back causing corrosion. I found a broken trace in the circuit board and soldered a wire on in its place. Seems to have fixed the problem for now, anyone know of some way to keep the corrosion from getting worse?
 (20260330_182250 (full).jpg)
 (20260330_182252 (full).jpg)
 (20260331_193226 (full).jpg)
 (20260331_194027 (full).jpg)
Attachments
----------------
 20260330_182250 (full).jpg (315KB - 2 downloads)
20260330_182252 (full).jpg (263KB - 2 downloads)
20260331_193226 (full).jpg (154KB - 2 downloads)
20260331_194027 (full).jpg (166KB - 2 downloads)
| |
|
John Deere 8560 left blinker not working
