|
Central Wi | Pin ran loose in frame and egged out the holes. No experience with a mag drill. Wondering if I could get a 2.25 od annular cutter and drill these out for a bushing back to 2". Im not sure how it would drill when the bit would be drilling in some places more than others. Checked into line bore but it sounded quite expensive. Open to suggestions.
 (20260331_131941 (full).jpg)
 (20260331_131950 (full).jpg)
Attachments
----------------
 20260331_131941 (full).jpg (96KB - 4 downloads)
20260331_131950 (full).jpg (83KB - 4 downloads)
| |
|
Landoll walking tandem problem
