|
ec. nebr. | I don’t have one, but in the past sprayer set ups, the line going to a pressure gauge, there is an isolater with a bladder on one side & oil on the other side going to the gauge. This would allow the pressure switch to be remote mounted in a well system. Probably could use antifreeze on the gauge side? The line would need to be totally full before screwing into the pressure switch. The isolater would be positioned close to the bladder tank in the cold area. Run the antifreeze filled line out and up to your pressure switch. I may try to find one to try this on mine.?? Put the pressure switch and gauge outside or in an enclosure.
Edited by flyboytoo 3/14/2026 11:29
 (IMG_1666 (full).jpeg)
Attachments
----------------
 IMG_1666 (full).jpeg (109KB - 11 downloads)
| |
|
Well pressure switch. Brand ?
