shulerfarm - 3/12/2026 11:33

You do have me scared. I was hoping it was the solenoid that modulated the flow to the clutch pack. Again my symptoms are in gears 5, 7, 9, 11 and R2 when sitting still and let out the clutch pedal the tractor jerks to speed. Others gears are fine. Once slightly rolling everything is smooth. So if it is the spring washers in the transmission I need to fully disassemble and rebuild or just make a point not to start off in any of the mentioned gears.

My post asking about my problems:
https://talk.newagtalk.com/forums/thread-view.asp?tid=1230613&mid=11...

I'd still swap that BC solenoid first with a known good one. Or replace it. It's a cheap way to check it out before you go diving in deep.