|
Ks | Flow meter worked fine one day nothing the next.. every once in a while it would read a little. I’ve tried everything I know of to troubleshoot it. I’m using it on a gs2 rate controller. I’ve tried a different flow meter. Nothing. Tried it on a different rate controller. Nothing. Tested continuity through the plug . Fine. Used a jumper wire on the controller side pins 2 o’clock and 6 o’clock. It reads pulses. Plug it back in. Nothing when spinning the turbine. Tried a different flow meter again. Nothing. Cleaned and tightened pins in plug. Nothing. But I did check continuity through plug. Fine. I’m at a total loss. | |
|
Raven flow meter problem
