Viewing a thread - Case 9250 dual hub

Forums | Classifieds (80) | Skins | Language

You are logged in as a guest. ( logon | register )

Case 9250 dual hub	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

fixitguy

Posted 3/8/2026 11:07 (#11577540 - in reply to #11577079)
Subject: RE: Case 9250 dual hub

Gillett WI

Farm Boy 37 - 3/7/2026 08:24

Correct. Two of the bolt holes on the wedge that has a thinner flange are threaded for the pusher bolts. They are a 7/8-12 thread, which is somewhat uncommon. They make the job fairly easy.

A 22mm 2.5 is very close to 7/8-12.

Case 9250 dual hub - Atbrdly : 3/7/2026 18:47
- RE: Case 9250 dual hub - Farminmyway : 3/7/2026 19:23
  - RE: Case 9250 dual hub - Farm Boy 37 : 3/7/2026 20:24
    - RE: Case 9250 dual hub - Atbrdly : 3/8/2026 08:53
      - RE: Case 9250 dual hub - Farm Boy 37 : 3/8/2026 12:06
    - RE: Case 9250 dual hub - fixitguy : 3/8/2026 11:07
- RE: Case 9250 dual hub - farmer_white : 3/7/2026 19:23
  - RE: Case 9250 dual hub - blowsand : 3/7/2026 22:33
    - RE: Case 9250 dual hub - pickle : 3/8/2026 08:38
      - RE: Case 9250 dual hub - Atbrdly : 3/8/2026 08:56
    - RE: Case 9250 dual hub - Atbrdly : 3/8/2026 08:55
      - RE: Case 9250 dual hub - blowsand : 3/8/2026 13:54
    - RE: Case 9250 dual hub - Atbrdly : 3/8/2026 09:03
      - RE: Case 9250 dual hub - pickle : 3/8/2026 10:53

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)