AgTalk Home
AgTalk Home
Search Forums | Classifieds (90) | Skins | Language
You are logged in as a guest. ( logon | register )

Nurse trailer ideas
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
Sugarcane215
Posted 3/8/2026 11:05 (#11577535)
Subject: Nurse trailer ideas


I am putting together a new nurse trailer its a 26ft used equipment trailer from a oil field company very stout and military hitch so can be pulled with my tractors. I have a 3200 endurplas tank i am mounting on the back. I usually run 3 totes and one or two low rate chemicals and surfactant.
I have a venturi and two mixing cones one with chem blade and then i also pulles out of my high volume chemical with a gear driven flow meter. I am debating if i should make a manifold to be able to suck all three chemicals threw the venturi or keep it setup like i have. I pump the two other bulk chemicals into the cones.
I usually hook up but don’t start my pump and put my li700 in first then pump my sencor 7.5 gallons and dump my callisto 80oz and then start pull all the sencor out the cone then suck my prowl h20 30 gallons takes a while. Then i pump my weedmaster in which is 5 gallons. I am worried i rig the manifold up and run out of time to get all the products in 500 gallons and my dads sprayer is 400 gallons with little less chemicals.
I have 3inch pump and feed 3inch but outlet of the pump is 2inch.
I am debating making a injection system where i would put the high volume pump on first followed in order.
My chemical supplier supply pumps and meters but i usually check the cone to make sure its at least what i want.
On my trailer i am thinking i will put the totes all the way in the front and maybe built a tote rack to put 4 totes. Two of my high volume one then my weedmaster and sencor on the bottom and building a square cage big enough to hold enough of the boxes for the day.
I have about 15 ft of deck space to play with so i am excited but also lost on which route to go. My old setup i had the tote of prowl way in the front of my tank. Tank was middle on top of the axles and back had my two cones and boxes and the other two totes on the ground and we would only move the trailer ones and would fill 2.5s up to use when we moved the trailer which is not ideal.
Now that i can fit everything i will have someone moving the trailer closer to us and they can run it back to the shop to fill it up out of my other tank as needed.




(IMG_3150 (full).jpeg)



(IMG_3131 (full).png)



Attachments
----------------
Attachments IMG_3150 (full).jpeg (144KB - 3 downloads)
Attachments IMG_3131 (full).png (169KB - 1 downloads)
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)