|
| Just a heads up, not sure if I've seen much charts for the 3D90, but the 90 comes from the 90% drift reduction connotation they use from European nozzle requirements, so if that is the case, the spray quality of the 3D90 would be more in the extremely coarse to Ultra coarse kind of spray quality.
EDIT: Seems like you have to search through the European Hypro site to find the chart, and sure enough the entire spray profile is going to be ULTRA COARSE, so definitely wont be drifting with your Liberty spray, but not really suitable for the coverage you'd need with the chem. I attached the chart for the 3D90s. Just mulitply the BAR pressure by 14.51 to get PSI. most of the nozzles are going up to 90PSI and still staying Ultra-coarse, so definitely not likely a first choice for Liberty spraying unless drift reduction trumps coverage by far.
Seems like the AI was confusing the two 3D and 3D90 as far as cherry picking the finer spray quality of the 3D while assuming significant drift reduciton of the 3D90.
Edited by WilgerIndustries 3/6/2026 12:33
 (3d90 chart (full).png)
Attachments
----------------
 3d90 chart (full).png (157KB - 1 downloads)
| |
|
Hypro 3D Nozzles
