Posted 3/4/2026 12:57 (#11573088 - in reply to #11573005) Subject: RE: 3/4” vs 1” for shop air hardline.
ne nebraska
For what it is worth, I ran 3/4" rapid air around the perimeter of my shop(70x85), I made the full loop. Air compressor in one corner of the shop. John Deere 80 gal stationary compressor set at whatever the factory cut in/cut out pressures are(125/150 maybe), and I have no issue at all running a 1" gun on the far end of the shop taking off truck tires.
3/4” vs 1” for shop air hardline.
