Jeffersonville, OH | kramer10 - 3/3/2026 16:52
No but I only use it for tillage usually. I messed with it last fall a lot more to try to figure it out. That was with a 15ft sunflower chisel and a challenger. It worked good for the most part but I was using the alternate skip sequence and I had to set it to skip 3 I believe to get it to work. I found that sequence to work best for us. Thats normally how I work ground anyways so I only turn one direction.
15' on a Challenger wheel tractor can you even drive it manually and steer back to the same pass on a 60' headland? Maybe with an extreme "keyhole" which the TurnPath can do some of, but not an extreme case.
Chris |
Ag leader Turnpath on articulated tractor
