|
Hennepin, IL | I adjusted the baffle this past summer and that probably helped the most out of anything. Found something online on a simpler way to do it than the book. IIRC center 2 bolts are just snug, tighten the outer 1 on either side enough so theres a gap between the baffle and duckbill in about 6", tighten the middle 1 on each side so they just contact. They were way too tight. I set the net brake tension at the same time but idk that it was even out of spec. I think I also adjusted the brake release per the book as it was off. | |
|
Net wrap
