|
Calhoun County, IL | repairman is correct. The wiring bundle is cheaper overall but since you already have the RE65674 harness it's kind of dependent on what you want to do with the planter. If you are going to do VR planting and planting maps in the future then you will need a different harness I believe. For the mapping and VR you need a mobile processor and I don't believe that the RE65674 harness can plug into the mobile processor.
The prices for the pieces that are needed to complete your harness should be about $375 for the ISO connector(#31 RE65674) and $400 for the fold box adapter (#30 AA50348). That seems extremely high for just those pieces especially when you can get entire kit (just as repairman suggested) for about $850. I have attached picture of the kit that john deere sells for non-deere tractors. It has everything that you need to hook up your planter to the greenstar display and it includes mounting brackets for the display, ISO connector and the starfire receiver. This is the harness that you would need to use if you wanted to map and/or do VR. But like I said since you already have the RE65674 harness you may just want to buy the other adapters and use it.
Good Luck
Edited by Ridge Runner 4/7/2010 18:47
 (pf90254.jpg)
Attachments
----------------
 pf90254.jpg (83KB - 938 downloads)
| |
|
JD1770 planter wire harness need help.
