AgTalk Home
AgTalk Home
Search Forums | Classifieds (3) | Skins | Language
You are logged in as a guest. ( logon | register )

High moisture silo conversion
View previous thread :: View next thread
   Forums List -> Stock TalkMessage format
 
Jay NE Ohio
Posted 2/2/2026 11:43 (#11537041 - in reply to #11536190)
Subject: RE: High moisture silo conversion



northeastern Ohio
1466 mo - 2/1/2026 18:28

Yes i do want to continue to use silo for high moisture i only have one access door at bottom 24x24 inches


Goliath and Alliance unloaders are both available in 24" widths. You will need a longer backbone because your concrete is probably 6" thick IF you want the arm to be centered. You could use a shorter arm and a standard backbone, but it wouldn't get the 6" of corn on the opposite side. I've seen guys run a short arm in a Harvestore for high moisture corn and it leaves 12" all the way around but not much above the arm height.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)