Posted 1/23/2026 17:09 (#11522404 - in reply to #11522299) Subject: RE: Hagie DTS 10, 2100, 284 ag leader conversion
What hagie and raven did you have and what did you convert to.
My section switch is now providing signal to the input module, the two wires that were previously connected to my section switch (raven signal/power to section valve)are now tied together with a jumper wire. Now my liquid control module sends power to the valve through the two wires I put a jumper between. My section switch is only giving input to the input module and the ag leader is providing power to the section valve through the jumper wire
I have sprayed with this and it does work as it should
Hagie DTS 10, 2100, 284 ag leader conversion
