Posted 1/23/2026 14:33 (#11522165 - in reply to #11521934) Subject: RE: Hagie DTS 10, 2100, 284 ag leader conversion
The raven 460 doesn’t provide power to the section caves like a 450 would, the 460 only recieves power to a signal wire that allow the raven to make rate corrections.
So when you use ag leaders raven adapter harness I believe it’s a 4001266 there’s no direct link for power to be sent to the valve unless you install a jumper wire in place of the factory boom switch allowing the ag leader to provide power to the valve rather than the factory switch.
If you didn’t install the jumper wire the factory switch would always send 12v power to the section valve and the ag leader wouldn’t be able to actually control the valve
Hagie DTS 10, 2100, 284 ag leader conversion
