|
Osakis, MN | Pictures are worth a thousand words. If you have a chance take several and post them. I should do the same. I scoured the Internet for days looking for answers to this very problem. I was installing a Greenstar rate controller and a 2630 with section control to my Hagie 2101. I figured it out and it was a project for sure. If someone would have had a post on Agtalk with precise directions I would have saved several days of searching. This reminds me that I should do the same post with details before I forget how I did it exactly. With my greenstar system I made five short three inch jumper wires with male spade ends on them. Removed the switch plugin from the section switch and jumped the section signal wire to make it work. I do not have the ability to use the console section switches anymore but rarely do I need to manually control sections anymore anyway. It not as easy to quickly flip sections off when you need to do it on a touch screen though. | |
|
|
Hagie DTS 10, 2100, 284 ag leader conversion
