|
E ND | I'm going to vote no on a repair. An inside slider section of an extendahoe is tough in general because you can't change the outside dimensions with reinforcement. This one looks bad based on location of that diagonal internal support and cracking up to the pin bore/bushing. You also have that factory doubler plate on the sides and the double top plate of pretty thick material. Not going to be easy to work with at all right there.
Anything can be fixed but I'd worry about how difficult it would be to get this one right again and hope it holds up. If there's a new or used section available I 'd lean that way. | |
|
Deere 310SJ boom broke. Can it be fixed?
