|
SE Michigan | previous post: had a few ask for updates along the wayfule
https://talk.newagtalk.com/forums/thread-view.asp?tid=1211814&posts=...
Just got the engine back from the builder, trans was rebuilt over the summer. Too cold to work in the shop now, I can handle it in the mid 30's but it been in the single digits here.
I have a retired mechanic coming over to help with the tuning and final adjusting, he also runs mustang drag cars so he knows a lot more then me.
Block is from a 1994 F350, (351W) that was series with a roller cam / lifters. bored .030" , new pistons and valve train. Mild street cam and GTP40 heads. It will have complete MDS electronic ignition. Holley 650 carb and electric fuel pump, the intake is an Edelbrock Air Gap .
Edited by BBfarms 1/21/2026 18:56
 (9c4bab6c-122d-4d35-8063-5878c7619aec (1) (full).jpg)
Attachments
----------------
 9c4bab6c-122d-4d35-8063-5878c7619aec (1) (full).jpg (165KB - 16 downloads)
| |
|
69 Mustang project update - requested by a few
