|
Hennepin, IL | Need to know how you physically have it connected first before much of anything. Ag Express makes a cable that would connect to the gps port on the display cable and connect to port a on the 372. To do that, you have to connect the 372 to a pro 700 or similar and configure A in agremote to output the NMEA strings needed then immediately shut the system off before it reverts the settings back. Laptop would work too but the cabling would be a little more in depth. If you have it on a tractor with a 700 already, you could export out of a serial harness instead. Last if you have a way to power the receiver in A, you could have a splitter plugged into physical port B and configure C for RTK corrections and D to output what the Integra needs. Thats also a little more in depth. Each method will be configured different, so itd be good to know what you have. There wont be any configuring done in the Integra for the GPS, just the steering. Not sure why they had the option for a TSIP receiver as I dont believe it was ever functional. | |
|
Ag leader ontrac 3, integra and 372 on rtk
