|
East Central, Nebraska | your pictures didn't show up until later, it appears you have stuff pretty jacked up. the last picture means nothing as that is what you would need to export gps to a device. somewhere it will allow you to select a gps and i believe is says something like external receiver or autodetect (or even serial would be better then tsip), after you select that i think those last two screens might go away. i am confused about how you got a port b screen when there is no ag leader gps connected. maybe im too rusty at this anymore but i know the rest to be true.....
sounds stupid but you don't have an ag leader gps connected also do you?
as for the lefebure app, that really has zero bearing on if this works or not initially, its important later but as i stated if you cant see your agremote screen on the 372 then we dont really know whats going on. we need to confirm that the 372 has a fix before we worry about what is going on with the ag leader side. the only thing i will add on the app is that when setup correctly you should(might) see the age show some information. right now from what i see in how its configured your getting android location, which is okay but you will have no way of knowing if it is sending data to the 372 for sure or not. if it were me, my next step would be confirming the 372 has a fix and make sure in the ag leader screen it is looking for gps from an external gps.
you state that you have waas but where are you seeing that your getting any waas corrections at? you should be able to get in to the gps diagnostic screen on the integra and see what exactly is coming in or lack of.
Edited by caseihfarmer 1/21/2026 13:22
| |
|
Ag leader ontrac 3, integra and 372 on rtk
