AgTalk Home
AgTalk Home
Search Forums | Classifieds (79) | Skins | Language
You are logged in as a guest. ( logon | register )

FM750, ntrip connection
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
caseihfarmer
Posted 1/17/2026 19:50 (#11514459 - in reply to #11514108)
Subject: RE: FM750, ntrip connection


East Central, Nebraska
so when you say digi3 are you referring to a beacon 3.0? i ask this because digifarm used to use "Digi" branded modems so that was slightly confusing to me.

one thing that i would focus on if i were sitting there with you diagnosing. i would make sure you can connect to the digifarm service without even having the 750 on. you should be able to set it up to connect without the beacon sitting in your house in your recliner. this will ensure you can connect to the network properly before you even start looking at the 750 as a problem. if you cannot start the app and see it start streaming then you have a tablet/phone problem. digifarm always wanted gps position to come from the display/beacon but when necessary they would run the fmx/cfx's on device position.

so if your unable to get the app to work without being connected to the 750 then it will never work when you connect to the 750. i would start there and if your continuously having no luck you need to consider your device being the problem.

give that a try and report back.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)