|
East Central, Nebraska | how are you sure your getting location back out of the 750? what android device are you using? i have seen were the android device doesn't have gps and that causing problems. rule of thumb was always the cheaper the device the least chance of it doing well on digifarm, i remember when you could get android devices for free when you paid for the data plan. guess how well that worked.
lets see your screen shots of how you have the output setup in the 750. it is looking for a gps location from somewhere so it can set your virtual base and isn't getting and will not proceed until it does. as you may have figured, both the android device and the 750 are giving it what it wants.
another question, does your beacon say fmx on it or 372? if its a 372 beacon it will work but not unless an adaptor cable is used that is pinned correctly. i have seen a beacon light up like it is supposed to being a 372 plugged into a fmx but never work as it is not pinned correctly.
give me more information and i will get you going. beacon 3.0's were rock solid when set up correctly.
Edited by caseihfarmer 1/16/2026 15:51
| |
|
|
FM750, ntrip connection
