Tipton, KS | lbummy16 - 1/14/2026 09:00
done with Deere RTK...Deere and AGCO sprayers...load the boundaries into the AGCO machines...Most are within a foot of accuracy...
Asked 6 years ago - Regarding NAD83 versus WGS84: There is little difference (within 1 meter of each other) between NAD83 and WGS84 but if you are doing a survey that needs a high degree of accuracy this would be an issue. The error is more dependent on where on the globe you are working than over distance I believe https://gis.stackexchange.com/questions/345360/regarding-nad83-versu...
Video on this topic: https://www.youtube.com/watch?v=vLFzKd9ogfg
Enclosed pic on right side illustrates the ballpark difference between NAD83 and WGS84. But, a RTK-base-station's location on Earth's techtonic plates determines how much your coordinates will change, as shown by pic on left side.
 (Screenshot 2026-01-14 112522 (full).jpg)
Attachments
----------------
 Screenshot 2026-01-14 112522 (full).jpg (54KB - 1 downloads)
|
Educate me on RTK boundaries collected with different brands
