|
NW Iowa | 8600 and 600 series are the same tractor, within the yr breaks. 09-11 and 12 on up
Each hp model tractor through each series is also the exact same
Only diff is the Challenger top cladding and the stupid joystick control in the massy.
Some challengers did have a joystick installed also, but not very many.
09-10 could have DEF or IEGR, 11 on up DEF only
09-11 had the toggle switches on the console
12 on up had the membrane pad.
12 and later had the 4 sensor active cab susp, prior had 2 sensor
the '12 and later were less glitchy...
All quality improvement updates were dependent on how good the dealer was at doing them
Same applies to the 09-11 Agco DT '11 was end production for those.
Main thing on all these models is how clean and shedded they have been kept.
Maintenance is very important
Some never gave any problems, then others had electrical gremlins.
knock on wood, been able to get everything parts related
Edit Any Agco, Massey, Cat dealer can work on all of them.
The only thing i believe is the Cat dealer will have to
do the Cat/perkins 6.6 acert engine diagnostics in the med frame 500 series until the 6.6 Sisu was used.
Edited by Massey1155 1/13/2026 10:19
| |
|
675c
