|
| Have a 9460r that I am removing the 6 remote on as it’s leaking and I don’t use it. The number 1 Scv is now the bottom remote as number 6 was under it before. Between 1 and 6 was a drain tube with o rings and on the bottom of 6 was 2 hammer in hose barbs for return line and drain. Do I just pound those hose barb fittings into the bottom of number 1 now? They hole in number 6 Scv was much shallower for the hose barb vs bottom of number 1 which is meant to accommodate o ring tube, will the hose barb still stay in the number one remote? Pictures below to help show it.
Edited by JD8345 1/12/2026 16:05
 (IMG_8623 (full).jpeg)
 (IMG_8620 (full).jpeg)
 (IMG_8621 (full).jpeg)
Attachments
----------------
 IMG_8623 (full).jpeg (88KB - 38 downloads)
IMG_8620 (full).jpeg (141KB - 41 downloads)
IMG_8621 (full).jpeg (95KB - 42 downloads)
| |
|
John Deere SCV bottom drain hose barb help
