Near Intersection of I-35 & I-90 Southern Mn. | Agree, that is why I posted a picture of the Ag Leader Liquid Product Control Module. If the sprayer has this on it, we know that the 2630 will not work with it and an Ag Leader display with a switch box arrangement would be required.
If that is the case, the wiring and Ag Leader module would need to be removed and replaced with the Deere equivalents. The flow meter, control valve and section valves could likely stay and be used with the Deere system. The Ag Leader products that are removed would have value to someone who is trying to use an Ag Leader display with a sprayer, NH3 bar, planter etc.
Actually I might have some interest myself since I have one on my planter and another on my Hagie sprayer. I might be interested in one for a spare. However, I have the option of moving one if the other should fail since they are rarely used at the same time. I have access to yet a third Liquid Product Control Module where one "side" of the control circuitry is damaged yet the other "side" seems healthy. This means it cannot control a butterfly or Servo style valve.
It could be used just for monitoring purposes where control is handled by another means. It might work with a PWM control valve such as my Hagie has but would require a bit of electronic trickery.
Edited by tedbear 1/10/2026 08:45
|
Sprayer with ag leader controls convert to Deere?
