|
| Here is something, to look at.
I had a hand drill , that it would work and then it would not . So I got another new hand drill and it works great. so
last month I was at the house and the old drill was the only one I had there and it would work then it wouldn't and just quit all together.
I thought it was in the drill as when I turned it a certain way it would work then another it would quit. I then realized that it was something in the cord.
So I took the drill apart and took the cord off and then I seen right before the cord goes into the thick part that goes into the handle, the whit wire was burnt off.
I cut the wire off at where it was good and put it on the drill and put it back together and now it works like new.
Try another plug in hand tool and see if it works , with no problem and if it does check the cord on the grinder.
Before I would just throw the drill out and get another. This is the first time I ever looked at the cord, on any thing. As the out side of the cord looked like there was nothing wrong with it.
| |
|
Electrical ? 110 plug
