|
| Bought a tender trailer off auction that has a newer Norwesco 3135 Gal HD blue tank on it. I noticed it has a few scrapes less than 1/16in deep, but has one gouge on back side probably around 1/8in deep. Hard to tell as the plastic rolls over making it look worse I suppose. I will be hauling 28% so don’t want to anything to happen on road. I see Norwesco sells a plastic welding kit, should I fill in the deeper gouge? Have pictures below but hard to see the gouges in them, haven’t been around to many transport tanks as I’m newer to spraying. Thanks
Edited by JD8345 1/9/2026 09:58
| |
|
Are these scratches/gouges a concern on Norwesco HD Tank
