|
northeastern Ohio | I asked ChatGTP about your 1825B and here is the answer for it:
Common stamped serial number locations on a CASE 1825B
Right-hand side of the loader frame (most common)
Look on the inside of the right lift arm / loader tower
Near the operator cab area, just above or below where the data plate would normally be riveted
Often lightly stamped and may be hidden under paint, grease, or rust. Use a wire brush or scraper and good lighting
Rear main frame crossmember
Check the rear of the machine, behind or below the engine compartment
Look along the upper rear frame rail or cross tube
Under the cab (less common but documented)
Some machines have a partial or full serial stamped on the top of the frame under the cab
The cab usually has to be tilted forward to see it
Helpful tips
The stamping is not deep — sanding or light grinding may be needed
A flashlight held at a shallow angle helps reveal faint numbers
Numbers typically begin with JAF0… or similar CASE format for that era
If you still can’t find it
A CASE dealer can sometimes recover the serial using:
Engine serial number
Hydraulic pump numbers
Original sales or service records | |
|
I can't find the serial numbers
