|
| There is only one display in this scenario.
The display in question has a built in Waas receiver with an antenna cord that goes directly into the back of the display. This results in it being very easy to use for other helpers/drivers in my operation that are not very tech savy.
When I use the rig, I would utilize an external RTK receiver that needs an antenna cord to go into the back of the external receiver in addition to several other things/complications that the internal waas doesn’t need in order to work, making it more complex to use.
Would like to be able to hook it up so that I only need to toggle between the external or internal gps selection on the display to switch between using the internal waas receiver or the external rtk receiver.
| |
|
Splitter for antenna?
