|
![](/profile/get-photo.asp?memberid=6091&type=profile&rnd=313) NEND | I can't offer any advice on layouts, I will be looking for advice on that as well. I can tell you you should be able to wire in an implement switch into your Raven. Do you have a loose orange wire & an orange/white wire in your Raven harness? If so, you can connect these two wires to a remote master switch. I put a remote switch in handy place near my throttle. Or you could install a foot switch. You could loop this external switch through your Greenstar harness & that would be your implement switch as well. If you don't have those wires, You might have to dig into the console box to accomplish the same thing. I can't remember where you connect an implement switch in on your Greenstar harness, but it can be done, unless you just have a Mobile guidance harness like I have in one tractor. I was told there isn't a place to wire an implement switch into that harness. | |
|