|
NW Ohio | For some reason, I believe Deere and Trimble/Ag Leader did not share a-b lines well. Something about the way they figured the lines, True north/vs. magnetic north, or Deere compensating for the curvature of the earth.... I don't remember for sure but I thought I remembered reading something along those lines on NAT before. Now with that being said, I think between Trimble or CIH and Ag Leader, things should line up ok as long as the correction source is the same as it was before (Same RTK network). Deere's RTK network may be a bit different than what you were using for your Pro 700's?
I could be wrong, but this is just what I thought I remembered from some past posts. I have no way of knowing for sure as I only have Trimble receivers. | |
|
Guidance lines between different displays
