Triplett / Brunswick MO / Brookfield | Lot's of the guages have never been set right.. Run it, stop, and slide the humps of dirt off to each side and check depth with screwdriver. Check front center section as well as wings, then check the rear row. Begin leveling and when you get it level front to back and side to side, adjust guage to suit yourself. It may be on inches, I can't remember. But when you crank the adjustable cranks, there is a decal by it that will tell you haw many turns to get an inch change, It's either 3 or 4 turns to change an inch. |
Case-IH 4800
