Thanks, Jay! I initially had mine at an angle and it just wasn't going to work out right due to my sewer vent running horizontal right where I needed to be on 2 of my hangers. I had already cut my wall exit like a dummy and by the time I could shift far enough to clear the septic vent, I was too far from my exit and a 45 at that point would have had me pointing at the sidewall halfway across the shop. I came in about 6 feet off the corner and am just aiming it straight across, should be fine that way. I could probably buy or rig some kind of louver to direct part of the flow at an angle towards the center if I need to. I've about got everything else done for the day and going to go make that connection shortly.