|
Clinton County, Michigan | I have used Hiper VR with AGPS control system on a plow. Would recommend using the antenna port so you can have a dedicated globe on the plow instead of the whole rover unit. There is an unlock needed to run 3rd party NMEA output. Yours may already have it, but you would need to use TRU software to double check. I'm not sure if the NMEA output would be stopped each time you connect the rover to the Topcon data collector, (not sure because AGPS software talks to the Topcon to requests the GGA each startup). Worst case without the unlock I think the work around is to start the rover with the Topcon data collector, and then re-program the NMEA output.
Also to repeat others; SF-RTK is not intended for vertical accuracy. | |
|
Can Topcon Hyper VR run intellislope
