|
NC IL | Fair enough. Tried again earlier outside.
Had the 6000 powered up for 20 minutes or so. Accuracy % bounced between 20 and 40. GPS signal % stayed at 0. Position Mode 3D None. I thought I saw it switch to 3D WAAS briefly when first powered up but it changed back to 3D None within one or two seconds.
Corrections age counted between 4 and 7 seconds. PDOP 1.5. Showed 8 GPS satellites in green with status OK. Showed 3 Starfire satellites, 2 in blue, 1 in green.
I did a capture data operation and exported to a USB drive as I figure the AMS rep would ask for that in the future.
I forgot to mention that I cleared the ISOBUS cache yesterday as well.
 (Screenshot 2025-12-08 134108 (full).png)
 (Screenshot 2025-12-08 134215 (full).png)
 (Screenshot 2025-12-08 134039 (full).png)
Attachments
----------------
 Screenshot 2025-12-08 134108 (full).png (174KB - 40 downloads)
Screenshot 2025-12-08 134215 (full).png (186KB - 44 downloads)
Screenshot 2025-12-08 134039 (full).png (159KB - 39 downloads)
| |
|
John Deere Starfire 6000 no SF1 signal
