|
Eastern Washington | If you disable and re-enable the LAN connection under network connections does it get a valid IP address and work? If so, you could automate that process if need be.
— or try —
If you open a command prompt: Start, Run, type: “cmd” no quotes. It will open a command prompt. Type: “ipconfig /release” (no quotes, then press enter)
Should say something like IP Addressses released
Then type: “ipconfig /renew” then press enter.
Sorry this was from memory and dont have a windows machine handy to verify syntax, but it may get you pointed in the right direction. | |
|
Computer connection to wired internet.
