I am having trouble getting NMEA out of a Greenstar GS2 into an Integra. It has an iTC reciever on SF2. The iTC and GS2 are on the most recent software updates. I have a cable, I believe a PF90350, TEEd at the receiver to bring the 9 pin serial in the cab. I set the serial output on the GS2 to 38,400, VTG, GGA, 5 Hz. I have tried using a null and not using a null cable. I got nothin'! I called Geenstar support and was told to use a PF90363, it will be a few days before I can get one. I know this has been discussed at lenghth on here in the past but can someone shed some light on this. Thanks.
Edited by jdj59d 4/1/2010 14:29
|