Viewing a thread - ? for engineers, wood workers, and all around know it all's ;> )

Forums | Classifieds (147) | Skins | Language

You are logged in as a guest. ( logon | register )

? for engineers, wood workers, and all around know it all's ;> )	View previous thread :: View next thread
Forums List -> AgTalk Cafe	Message format

Posted 12/6/2025 22:51 (#11460076 - in reply to #11459992)
Subject: RE: ? for engineers, wood workers, and all around know it all's ;> )

Franklinton, LA

I am surprised at the variation in the width of the lumber. Apparently, the sawmill needed to be adjusted or possibly repaired. Well, the sawmill operator may have been having a bad day. I guess I have been lucky to have worked with some good sawmill operators.

If you need 1/16" accuracy on width you need a good infeed and outfeed table that is the same height as your table saw. Also, you can clamp or bolt a good straight 8' long 2 X 4 to the table saw rip fence. This will be very helpful if the boards are slightly bowed.

Edited by DRester 12/6/2025 22:52

(005003-R1-009-3 (full).jpg)

(HalSpence01-06 (full).jpg)

(SawMill.1.12.06.085 (full).JPG)

(LumberD01-06 (full).jpg)

(402853-R1-023-10 (full).jpg)

Attachments
----------------

Attachments

005003-R1-009-3 (full).jpg (147KB - 21 downloads)
Attachments

Attachments

HalSpence01-06 (full).jpg (140KB - 19 downloads)
Attachments

Attachments

SawMill.1.12.06.085 (full).JPG (140KB - 18 downloads)
Attachments

Attachments

LumberD01-06 (full).jpg (145KB - 17 downloads)
Attachments

Attachments

402853-R1-023-10 (full).jpg (141KB - 16 downloads)

Top of the page

Bottom of the page

? for engineers, wood workers, and all around know it all's ;> ) - Paystar500 : 12/5/2025 18:53
- RE: ? for engineers, wood workers, and all around know it all's ;> ) - Busted Piston : 12/5/2025 19:01
- RE: ? for engineers, wood workers, and all around know it all's ;> ) - JohnW : 12/5/2025 19:08
  - RE: ? for engineers, wood workers, and all around know it all's ;> ) - Paystar500 : 12/5/2025 19:30
- RE: ? for engineers, wood workers, and all around know it all's ;> ) - Yoosta B : 12/5/2025 19:42
  - RE: ? for engineers, wood workers, and all around know it all's ;> ) - Paystar500 : 12/5/2025 19:48
- RE: ? for engineers, wood workers, and all around know it all's ;> ) - scott312 : 12/5/2025 19:44
  - RE: ? for engineers, wood workers, and all around know it all's ;> ) - Paystar500 : 12/5/2025 19:52
  - RE: ? for engineers, wood workers, and all around know it all's ;> ) - rosiesdad : 12/6/2025 07:15
- RE: ? for engineers, wood workers, and all around know it all's ;> ) - Haleiwa : 12/5/2025 19:49
- RE: ? for engineers, wood workers, and all around know it all's ;> ) - DRester : 12/5/2025 19:53
  - RE: ? for engineers, wood workers, and all around know it all's ;> ) - Paystar500 : 12/5/2025 20:30
    - RE: ? for engineers, wood workers, and all around know it all's ;> ) - WCWI : 12/5/2025 20:58
- RE: ? for engineers, wood workers, and all around know it all's ;> ) - ManiaPlus : 12/5/2025 21:50
- RE: ? for engineers, wood workers, and all around know it all's ;> ) - Iowajim : 12/5/2025 21:53
  - RE: ? for engineers, wood workers, and all around know it all's ;> ) - Paystar500 : 12/5/2025 22:06
    - RE: ? for engineers, wood workers, and all around know it all's ;> ) - paul the original : 12/5/2025 22:58
      - RE: ? for engineers, wood workers, and all around know it all's ;> ) - Paystar500 : 12/6/2025 09:14
- RE: ? for engineers, wood workers, and all around know it all's ;> ) - WildBuckwheat : 12/5/2025 22:10
- RE: ? for engineers, wood workers, and all around know it all's ;> ) - WayneWKY : 12/5/2025 22:43
- RE: ? for engineers, wood workers, and all around know it all's ;> ) - rosiesdad : 12/6/2025 07:03
- RE: ? for engineers, wood workers, and all around know it all's ;> ) - Hick : 12/6/2025 08:24
- RE: ? for engineers, wood workers, and all around know it all's ;> ) - HuskerJ : 12/6/2025 09:17
- RE: ? for engineers, wood workers, and all around know it all's ;> ) - DieselDennis : 12/6/2025 09:18
- RE: ? for engineers, wood workers, and all around know it all's ;> ) - chisel : 12/6/2025 10:58
- RE: ? for engineers, wood workers, and all around know it all's ;> ) - tommyw-5088 : 12/6/2025 14:58
- RE: ? for engineers, wood workers, and all around know it all's ;> ) - DRester : 12/6/2025 15:07
  - RE: ? for engineers, wood workers, and all around know it all's ;> ) - Paystar500 : 12/6/2025 21:06
    - RE: ? for engineers, wood workers, and all around know it all's ;> ) - DRester : 12/6/2025 22:51
    - RE: ? for engineers, wood workers, and all around know it all's ;> ) - Haleiwa : 12/7/2025 07:55
- RE: ? for engineers, wood workers, and all around know it all's ;> ) - 150pilot : 12/6/2025 20:07
  - RE: ? for engineers, wood workers, and all around know it all's ;> ) - WCWI : 12/6/2025 23:16

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)