| Farmer087 - 12/2/2025 17:20
Here's the style of legs he's working with.
I doubt he wants to go states away, but I should check around a bit. I'm guessing he was going to bolt the boards on.
I have some pallet racking that style, I can get you a picture of the crossmembers, but going by memory they are 3" or 4" channel iron welded to angle irons on the ends that bolt to the uprights you have pictured, there is then smaller angle irons going from front to back that ties everything together and gives you a place to set the pallets on, Ill try and get some pictures and will add them to this post when I get them. |
Pallet rack machinery
