|
| Wrong answer. I know where 3 Schuler 6520's run and if the blades are sharp they do good. Put a bale in then start adding wet feed, silage, whatever. By the time you get everything in and drive a short distance, it's ready to feed. That being said, since Vermeer bought Schuler, I'm not sure they make a single screw that big, would need to check. A 6520 is 650 cubic feet. A lot of guys want a 2 screw to shorten side height, but a lot of them will spit more hay out the top. Only thing above and I agree on is get a demo or go to a farm that has one and watch it run
Edited by swampdoc 11/22/2025 20:02
| |
|
Educate me on single screw tub mixers
