AgTalk Home
AgTalk Home
Search Forums | Classifieds (72) | Skins | Language
You are logged in as a guest. ( logon | register )

Pull grader vs 3 point grader blade
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
wcfields
Posted 11/16/2025 11:18 (#11436531 - in reply to #11436049)
Subject: RE: Pull grader vs 3 point grader blade


Chatham Ontario.
I've had a Buhler Farm king 150 blade for at least 15 years. Three cylinders, boom swing, blade tilt,and angle left right. Also has the tail wheel option. It's the tail wheel that makes the blade. For maintaining a dive way or yard you will have will have so much control, from the tractor seat, you will be very impressed. My tractor has front suspension that I shut off for grading. The tail wheel has a turnbuckle to set for depth which is seldom changed. I also added end plates for snow removal and getting a smooth finish grading a yard.
It helps to have a little moisture for cutting deep through wash board but after a few passes over time it will just be a matter of small touch ups. The tilt option is very good for keeping a crown on the lane. I added a laser one time to level the gravel floor in our shed. Didn't work out too bad. I'll see if I can add that picture.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)